Shopping Cart |  My Account |  Rep's Web

E-FS Series

FireShield Fire Alarm Control Panel Conventional 1, 3, 5 & 10 Zones

Description

The E-FS Series Panels are discontinued and have been replaced by E-FSC Series conventional panels.  Please click here for more information.



  • 3, 5 or 10 Class B initiating device circuits (IDC)

  • 1, 2 or 4 Class B Notification Appliance Circuits

  • IDC or NAC pairs convertable to single Class A circuits (10 and 5 IDC panels only)

  • Supports 2400, ED2M and SC series detectors

  • Zone programmable NACs selectable for Genesis, continuous or temporal output

  • Genesis option provides strobe sync and audible silence over two wires

  • NAC capacity 1 zone: 1.0 amps

  • NAC capacity 3 zone: 1.5 amps

  • NAC capacity 5 zone: 2.5 amps

  • NAC capacity 10 zone: 2.5 amps expandable to 5.5 amps NAC circuit; 1/2 amp aux current

  • Relays for alarm, supervisory and trouble conditions

  • Many options available



The Edwards FireShield fire alarm family consists of 1*, 3, 5 and 10 zone conventional fire alarm control panels, and integrated DACT/Dialer*, serial annunciator modules, and serial remote relay modules. All of these components are microprocessor-controlled. The FireShield family is ideal for both new and retrofit installations alike.

Edwards FireShield incorporates features designed to simplify installation, operation and maintenance. These include front panel programming, one person walk testing, and selectable IDC and NAC types. In addition, these panels have combination waterflow and supervision IDC.

Options for the FireShield panels include serial bus relay modules programmable for common or zone activation, serial bus remote annunciators, city tie and reverse polarity modules, and optional trim rings for semi-flush mounting. An optional fully integrated DACT/Dialer provides 32 character LCD display, event history log, support for Contact ID and SIA DCS 4/2, and upload/download of Panel/DACT configuration, status and event history.

FireShield panels are powerful enough to meet the demands of today's installations while leaving plenty of room to grow in the future. All available current may be used for notification appliances, or up to 0.5 amps can be used as auxiliary current.

Optional modules and remote indicators mount in boxes with snap-trak or are gangable behind "Decora" switch plates.

*NOTE: The FSDACT cannot be used with a one zone fire alarm panel. If the application requires the FSDACT Dialer, you must purchase a panel with three or more zones.

E-FS Series

Link to this product

Catalog Numbers

Purchase from the Edwards on-line store or Locate a distributor in your area
Enter your Zip Code:
Catalog Number
Description

Specifications

Approvals

Agency Approvals
UL Listed ULC Listed CSFM Certified
Specifications
Cat. No.NameFunction
BC-2Battery CabinetGray battery box - holds two batteries
BC-2RBattery CabinetRed battery box - holds two batteries
CTM4.7City Tie ModuleReporting events to local energy Master fire alarm box
EOL36-11End-of-line ResistorOne 3.6K resistor and one 1.1K resistor
FSAT SeriesTrim Plate1, 2, 3 or 4 gang trim plate (white, red or gray) for Remote Annunciator
FS-DACTDACT/DialerReporting events to a remote monitoring facility
FSCUConfiguration SoftwarePC downloading of configuration and event history
FSRRMRelay ModuleFive Form C relays (1A each) - configurable as zone or common system mode
FSRRM-S1111 in. Mounting trackMounting track for 2-4 FSRRMs. Mounts in MFC-A or other listed FA enclosure
FSRSIRemote System IndicatorRemote Annunciator Module - common LEDs & sounder w/silence
FSRZI-ARemote Zone IndicatorRemote Annunciator Module - 5 Zone LEDs
FSTRIM35G or FSTRIM35R3 & 5 Zone Trim RingSemi-flush mounting of 3 & 5 zone panels (gray or red)
FSTRIM10G or FSTRIM10R10 Zone Trim RingSemi-flush moutning of 10 zone panels (gray or red)
MFC-AFSRRM Mounting Cabinet Holds up to 4 FSRRM Modules when used with optional FSRRM-11 snap-track
RPMReverse Polarity ModuleReporting alarm status to remote monitoring facility
XTR3A120Power Supply ExpanderExpands 10 zone panel with 2.5 amps additional power
Images

(click to enlarge)

Documentation

Catalog Pages
Installation Instructions
Technical Bulletins