Technical bulletin describing an issues with the SA-DACT dialer and shared phone lines.
Bulletin describing possible nuisance conditions with the E-PD and E-PHD addressable detectors and instructions for using the TF-13029 utility.
This is a technical bulletin regarding internal device faults with E-FSA addressable panels. Bulletin explains issue and how to resolve.
5531B Input Wiring Considerations
Intermittent flash when Strobes are use with a PLC
Power Supply for the 177-RG5 and 178-RG5
7641-1G5 marked with "X-RAY IN USE"
Electric Door Strikes used with Call for Assistance Kits
Allen-Bradley SLC-5/03 Connectivity
How to display text messages using a PLC
Activating Preloaded Messages using a PLC
Activating Messages using a Dry Contact Closure
Compatible Locksets for Edwards Door Openers
PLC Connectivity of 103 Chameleon
Battery Backup for Adaptatone Millennium Connecting an emergency battery backup system to an Adaptatone system using the Edwards EBPS6 power booster supply in combination with an MR201/C relay.
Information on how to configure signal circuits on the E-FSA panel to synchronize Edwards' Genesis strobes.
This bulletin provides tips for using Edwards dialers with TCP/IP internet and GSM (cellular phone) interface devices used for connecting to central monitoring stations.
Tips on how to program the E-FSA addressable panel for elevator control.
Tips on dealing with electromechanical devices, and the electrical noise they can generate on fire alarm circuits.
Tips on connecting to an E-FSA addressable panel via modem.
Trouble shooting tips for loop faults on the E-FSA panels.
Tips on how to wire a booster power supply to the E-FSA panels.
Tips on how to program (turn on) the addressable SB4U sounder base.
RS232 cable connection diagram for connecting a laptop to the E-FSA panels.
Tips on how to wire and supervise the power to SB4U addressable sounder bases.
Tips on how to do cross zoning with the E-FSA addressable panels.
Tips on how to connect a laptop running the FSA-CU configuation utility program to an E-FSA addressable panel.
Wiring distances/limitations for the E-FSA addressable loop.
Tips on how to use and program latching outputs on an E-FSA addressable panel.
Tips on how to connect door holders to fire alarm systems.
Tips on using the FSA-CU configuration utility program for the E-FSA panel.
Tips on connecting an ANS audio panel with multiple speaker circuits to a fire alarm panel.
Tips on connecting an ANS audio panel to a fire alarm panel for voice/messaging capability.
Tips on using end of line resistors with the ANS series audio panels.
Tips on connecting a backup amplifer to an ANS audio system.
Tips on sizing speaker (wattage) and amplifiers for fire alarm voice evacuation systems.